Figure 1-1. Calculating An Ip Address (Direct Access Pvc Or Standard Ppp) - Nortel Remote Access for AN and Passport ARN Routers Configuration Manual

BOOTP request
Figure 1-1.
Note: The BootP client interface table contains a data link connection
identifier (DLCI) and IP address pair for each PVC. You use Site Manager to
create this table when you follow the instructions for setting up routing paths
in Chapter 3.
308614-14.20 Rev 00
AN/ANH/ARN router
Upstream router
IP address 192.32.1.1
Calculating an IP Address
(Direct Access PVC or Standard PPP)
-- A frame relay PVC in group access mode refers to its BootP client
interface table to find an associated IP address for the AN/ANH or ARN
router.
For example, in
requests for its IP address. The upstream router receives the request on
PVC 31. The upstream router determines the DLCI, refers to DLCI 31 in
the BootP client interface table, finds the IP address, and sends a BootP
response containing the IP address back to PVC 31.
BOOTP response with
IP address 192.32.1.2
NPA0001A
Figure 1-2, the AN/ANH or ARN router sends BootP
Understanding Tools and Options
1-7