98 Chapter 6 Remote Node setup
Traffic Redirect setup
Configure parameters that determine when the Business Secure Router forwards
WAN traffic to the backup gateway using Menu 11.1.5 — Traffic Redirect
Setup.
Figure 33 Menu 11.1.5: Traffic Redirect setup
Menu 11.1.5 - Traffic Redirect Setup
Active= Yes
Configuration:
Press ENTER to Confirm or ESC to Cancel:
Table 24
Table 24 Menu 11.1.5: Traffic Redirect setup
Field
Active
Configuration:
Backup
Gateway IP
Address
Metric
NN47922-501
Backup Gateway IP Address= 0.0.0.0
Metric= 15
Check WAN IP Address= 0.0.0.0
Fail Tolerance= 3
Period (sec)= 5
Timeout (sec)= 3
describes the fields in
Description
Press [SPACE BAR] and select Yes (to enable) or No (to
disable) traffic redirect setup. The default is No.
Enter the IP address of your backup gateway in dotted
decimal notation.
The Business Secure Router automatically forwards traffic
to this IP address if the Business Secure Router Internet
connection terminates.
Enter a number from 1 to 15 to set this route's priority
among the Business Secure Router routes. The smaller
the number, the higher priority the route has.
Figure
33.
Example
Yes
0.0.0.0
15
(default)