Configuring The Pppoe Client; Figure 23 Internet Access Setup (Pptp); Table 17 New Fields In Menu 4 (Pptp) Screen - Nortel 222 User Manual

82 Chapter 5 Internet access
After configuring My Login and Password for PPP connection, press
[SPACE BAR] and then [ENTER] in the Encapsulation field in Menu 4
-Internet Access Setup to choose PPTP as your encapsulation option. This
brings up the screen show in

Figure 23 Internet access setup (PPTP)

Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPTP
Service Type= N/A
My Login= username
My Password= ******
Retype to Confirm= ******
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Table 17
Encapsulation field in menu 4.

Table 17 New fields in menu 4 (PPTP) Screen

Field
Encapsulation
Idle Timeout

Configuring the PPPoE client

If you enable PPPoE in menu 4, you will see the screen in figure 24. For more
information about PPPoE, see
NN47922-501
Figure
contains instructions about the new fields when you choose PPTP in the
Description
Press [SPACE BAR] and then press [ENTER] to
choose PPTP. The encapsulation method influences
your choices for the IP Address field.
This value specifies the time, in seconds, that elapses
before the Business Secure Router automatically
disconnects from the PPTP server.
23.
Appendix E, "PPPoE," on page
Example
PPTP
100
(default)
253.