Time and Date setting
There is a software mechanism to set the time manually or get the current time
and date from an external server when you turn on your Business Secure Router.
With Menu 24.10, you can update the time and date settings of your Business
Secure Router. The real time is then displayed in the Business Secure Router error
logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenancet.
Figure 114 Menu 24: System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to
update the time and date settings of your Business Secure Router, as shown in
Figure
Menu 24 - System Maintenance
Enter Menu Selection Number:
115.
Nortel Business Secure Router 222 Configuration — Advanced
Chapter 16 System Maintenance menus 8 to 10 205