Table of Contents
Advertisement
Dimming actuator, 4-gang Standard
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual
fully.
Danger of electric shock. Always disconnect before carrying out work on the device
or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage
because mains potential even is applied on the load when the output is switched off.
Always disconnect before carrying out work on the device or load. To do so, switch
off all associated circuit breakers.
Risk of destruction of the dimmer and load if the set operating mode and load type do
not match. Set the correct dimming principle before connecting or exchanging the
load.
Fire hazard. For operation with inductive transformers, each transformer must be
fused on the primary side in accordance with the manufacturer's instructions. Only
safety transformers according to EN 61558-2-6 may be used.
This manual is an integral part of the product, and must remain with the end cus-
tomer.
2
Device components
(1)
Button field for manual operation
(2)
Programming button and LED
(3)
Bus connection
(4)
Status LEDs for outputs
(5)
Load connections
82402732
Image 1: Device components
07.06.2021
3 / 17
Advertisement
Table of Contents
