Configuring DECT system
information
Before you can make a telephone call using the DECT handset, the
handset must be subscribed to a DECT system. The handset can be
operated with a maximum of ten DECT systems.
Note: When the handset is not yet subscribed to the system, the
display shows No Subscription.
System
Use the
•
"Subscribing the handset to a DECT system" on page 71
•
"Manually selecting the DECT system" on page 73
•
"Enabling automatic DECT system selection" on page 74
•
"Deleting a system" on page 75
•
"Editing the system name and phone number" on page 76
•
"Checking the Equipment ID (IPEI)" on page 76
To carry out the following steps, you must be familiar with the use of the
handset controls; see "Handset controls" on page 13.
Accessing the System menu
1. Press the
Menu
2. Press the
N
System
3. Press the
OK
Subscribing the handset to a DECT system
The handset must be subscribed to at least one DECT system before it
can be used. Ask your system administrator to subscribe your DECT
handset to a system.
Configuring DECT system information
menu to perform the following tasks:
:
Menu
arrow
System
option.
OK
soft key.
keys to scroll and highlight the
soft key.
71