Feature Activation Displays - Nortel 6120 User Manual

Your WLAN Handset 6120 and 6140
Figure 2 Standby Mode Display
Figure 3
Feature mode display

Feature Activation displays

The handset enters Active Idle mode when Actv is pressed from standby mode,
displaying feature activation softkeys. These softkeys also display during an active
call.
When is pressed during active idle mode or while in an active call, the softkey
FCN
labels shown below display additional features that can be activated for call handling.
Additionally, when is pressed during active or active idle mode, a Feature List
FCN
displays that lists features that have been configured for your facility. The
Exit
softkey or END returns to the previous display.
Features may also be programmed to the key. Press when in active mode to
Line Line
view the list of features that have been programmed for your facility. Line features are
explained later in this text.
27