60 Troubleshooting tools
Procedure steps
Step
1
Variable definitions
Variable
enable <value>
id
in-port <value>
mode <value>
out-port <value>
Deleting mirror-by-port entries
Use the following procedure to delete an entry from the mirror-by-port table.
Procedure steps
Step
1
Copyright © 2007, Nortel Networks
.
Action
To create a new mirror-by-port table entry, enter the following
command:
config diag mirror-by-port <id> create in-port <value>
out-port <value> [mode <value>] [enable <value>]
Action
To delete an entry from the mirror-by-port table, enter the following
command:
config diag mirror-by-port <id> delete
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
Value
Enables the mirroring port. <value>
can be true or false. Enables (true)
or disables (false) a mirroring port
already created in the mirror-by-port
table.
This variable is optional.
The mirror-by-port entry ID (1 to 383).
The mirrored port.
Sets the mirror mode. <value> can be
tx, rx, or both.
•
tx mirrors transmit packets.
•
rx mirrors receive packets.
•
both mirrors both transmit and
receive packets.
This variable is optional.
The mirroring port.