Nortel 8300 Troubleshooting Manual page 79

Variable
severity <value>
tail
Job aid: Configuration example
This configuration example uses the preceding command to write a log file,
where the tail option was entered to display the most recent information
first.
Figure 5 "Show log tail file command output" (page 80)
output for this command.
Copyright © 2007, Nortel Networks
.
Note: If the Ethernet Routing Switch 8300 has a real-time clock, the log
file shows real time.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
Displaying and configuring log files 79
Value
Specifies the severity level of the
events that you want to display.
<value> is one or more of the
following options: INFO, ERROR,
WARNING, and FATAL.
Use "|" to separate the options.
Displays the log file in reverse order,
with the most recent information first.
Issuing the show logging file
tail command shows only the log
messages reported after the system
comes up. This avoids system
problems when displaying a large
(larger than 10 MB) /pcmcia/syslog.txt
file.
shows sample