Nortel 8300 Troubleshooting Manual page 76

76 Troubleshooting tools
Step
1
2
3
4
5
Variable definitions
Variable
add-IP <ipaddr>
filename <str>
<id>
Job aid: Configuration example
The following example shows how to specify that you want the syslog file
to be transferred to a remote host with the IP address of 10.10.10.10, and
display the remote IP address that you specified and the default file name.
Passport-8310:5# config log transferFile 4
Copyright © 2007, Nortel Networks
.
Action
To specify the remote FTP/TFTP server to which you want to transfer
the syslog file, enter the following command:
config log transferFile <id>
To add a host, enter the following command:
config log transferFile add-IP <ipaddr>
To specify the name of a file at the remote host, enter the following
command:
config log transferFile filename <str>
To display the remote IP address and file name of the remote host,
enter the following command:
config log transferFile info
To remove a host, enter the following command:
config log transferFile remove-IP
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
Value
<ipaddr> is the IP address of the
host being added.
<str> is the name of the file at the
remote host.
Identifies the syslog file. The range
is 1 to 10. You can configure up to
10 transfer files.