Deleting A Single Port Smlt; Configuring An Ist Mlt - Nortel 8300 User Manual

124 Configuring static link aggregation
Single Port SMLT tab fields

Deleting a single port SMLT

To delete a single port SMLT:
Step
1
2
3
4
5
6
Configuring an IST MLT
To configure an IST MLT, perform the following procedure (this procedure
assumes you already configured at least one MLT):
Step
1
2
3
4
5
6
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
Copyright © 2005-2007, Nortel Networks
.
describes the fields on the Single Port SMLT tab.
Action
Select the port from the Device Manager main window.
Select Edit > Port from the menu bar.
The Port dialog box appears with the Interface tab selected.
Select the SMLT tab.
The SMLT tab displays the single port SMLT ID.
Select the single port SMLT by selecting any field in the row.
Click Delete.
Click Close.
The single port SMLT configured for the port is deleted.
Action
Select VLAN > MLT from the Device Manager menu bar.
The MLT dialog box appears with the MultiLink Trunks tab selected.
Double-click the PortMembers field in the row containing the
desired MLT.
PortMembers dialog box appears.
Select the ports to include in the MLT.
Click OK to close the PortMembers dialog box.
The selected port members are added to the PortMembers field of
the MLT dialog box.
Double-click the MltType field.
Select istMLT from the list.
Nortel Ethernet Routing Switch 8300
NN46200-510 03.01 Standard
4.0 27 August 2007
—End—