Troubleshooting Configuration Examples; Configuring Port Mirroring Using The Nncli - Nortel 8300 Troubleshooting Manual

Troubleshooting configuration
examples
Navigation
•
•
Configuring port mirroring using the NNCLI
The following configuration examples use the commands described
previously to perform the following tasks:
•
•
•
•
•
•
•
Example 1
To set up ingress port mirroring and set the mode to receive, use the
following command:
Passport-8310:5(config)# port-mirroring 1 rx 2/1 6/4
enable
Example 2
To delete mirroring on a port, use the following command:
Passport-8310:5(config)# no port-mirroring 1
Copyright © 2007, Nortel Networks
.
"Configuring port mirroring using the NNCLI" (page 163)
"Configuring port mirroring using the CLI" (page 165)
Create an ingress port-mirror
Delete port-mirroring on a port
Change the mode of the port-mirror
Change the mirrored port
Disable port-mirroring on a port
Change the mirroring port
Display mirrored port information
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
163