Monitoring Port Statistics Using The Cli - Nortel 8300 Troubleshooting Manual

134 Troubleshooting tools

Monitoring port statistics using the CLI

To monitor port statistics, use the following command:
monitor
Table 19 "Monitor commands" (page 134)
the monitor command.
Table 19
Monitor commands
monitor
monitor mlt error collision [<mid>]
monitor mlt error main [<mid>]
monitor mlt stats interface main [<mid>]
monitor mlt stats interface utilization [<mid>]
monitor ports error collision [<ports>] [from <value>]
monitor ports error extended [<ports>] [from <value>]
monitor ports error main [<ports>] [from <value>]
monitor ports error ospf [<ports>] [from <value>]
monitor ports stats rmon [<ports>] [from <value>]
monitor ports stats interface extended [<ports>] [from
<value>]
monitor ports stats interface main [<ports>] [from <value>]
Copyright © 2007, Nortel Networks
.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
shows the available options for