Table of Contents
Advertisement
DDI-10E INSTALLATION AND OPERATION MANUAL
5.1.6 Using your PC to connect to the DDI-10 with Exprecium III
Exprecium III can be used to see the current Full Version of the firmware installed in the
DDI-10E. Exprecium III can also be used to view the current configuration settings or to
load new firmware in the DDI-10E.
5.1.7 Launch Exprecium III
The current version firmware installed will be displayed in the Terminal area of the
display. In this example v2.0.1 D
5-4
Digitize, Inc.
Specifications Subject to Change Without Notice
Additional
selections
Leave UN
Checked !!
700280-0001 Rev. B 5/11
Advertisement
Table of Contents
Need help?
Do you have a question about the DDI-10E and is the answer not in the manual?