Table of Contents
Advertisement
DDI-10E INSTALLATION AND OPERATION MANUAL
2.8.3 Copy one config table to another
At the CUST/CONFIG screen, Enter 3 (COPY) and the display will read:
Press the FUNC button to move to the next field (TO).
If the FROM and TO Configuration Numbers are correct, and SET is pressed, the printer
will print the following message:
Any configuration may be copied into another configuration. A blank Configuration may
be copied over another configuration in order to delete the entire configuration. Before
copying any configuration, it is recommended that both the TO and FROM Configuration
Tables be printed first to ensure that a Configuration is not inadvertently copied over or
erased.
The Configuration Tables may be printed at any time when viewing the Alarm Code or
English Equivalent Screens.
2-12
COPIED CONF #1 to #8
07 FEB 95
10:42:01
Digitize, Inc.
Specifications Subject to Change Without Notice
700280-0001 Rev. B 5/11
Advertisement
Table of Contents
Need help?
Do you have a question about the DDI-10E and is the answer not in the manual?