Dialer Set Up - DIGITIZE DDI-10E Installation And Operation Manual

2 DIALER SET UP

After the DDI-10E is installed into the unit, operator will access the Set Up MENU
through the front panel keypad. By pressing the SET button, the operator may step
through all available menus. If pressed for over one second, the SET button will auto
repeat. Direct access to the DDI-10E menu is possible by entering the menu number
(16) and pressing the SET button.
When using the DDI-10E with Contact ID format, the only information that must be set
up using the 16 SET menus is the customer number and whether the DDI-10E reports in
24 hours or less often.
After pressing 16 SET, the display will read:
Press the FUNC button and the display will prompt the user to enter a password:
700280-0001 Rev. B 5/11 Digitize, Inc.
2-1
Specifications Subject to Change Without Notice