Table of Contents
Advertisement
DDI-10E INSTALLATION AND OPERATION MANUAL
5.1.3 Configuration Settings Information
The DDI-10 must be manually configured for set ups ie. Handshake order, Answer on
ST
TH
1
or 4
ring, 3-2 instead of 4-1 etc. Customers will also have the ability to re-configure
their DDI-10 in the field should the Digitize Factory default settings need to be changed.
5.1.4 Digitize Factory Default Settings
The Factory Default Settings have been chosen based on knowledge from previous
receiver setting in many of our installations and input from MCDI.
5.1.5 Setting Up the DDI-10 with WinExprecium II
Standard Settings
Standard Settings
Standard Settings
After Changes click
Save Settings
5-2
Digitize, Inc.
Specifications Subject to Change Without Notice
Standard
Settings
Standard
Settings
Variable Number of
Rings to answer
1 standardor
4 Custom applications
Standard
Settings
700280-0001 Rev. B 5/11
Advertisement
Table of Contents
Need help?
Do you have a question about the DDI-10E and is the answer not in the manual?