DIGITIZE DDI-10E Installation And Operation Manual page 20

DDI-10E INSTALLATION AND OPERATION MANUAL
The fourth line of the display will read "SEE PRINTOUT" and an audible Trouble buzzer
will sound. To silence the buzzer the operator must press "CLEAR".
The following message will print when the first dialer is missed:
In addition, the following message will print for each missed dialer:
The dialer report will list all of the dialers that have failed to report within the 24 Hour
period. To obtain the dialer report, press SHIFT (
message will print:
Missed dialer messages will not appear on the screen or on the thermal printer while the
operator is in the SET menu (i.e. adding new customer numbers). When the operator
has pressed CLEAR twice and exited Dialer Set-Up, the error message will appear on
the screen, the buzzer will sound and the error message will be printed.
Press the FUNC button to move the cursor to the next field (CONFIG) and the revolving
message will change again. The new message will read:
Use ↑↓ to change value. CONFIG sets the table that will be used to decode the
CUSTOMER number selected to ADD. The CONFIG table tells The SYSTEM 3505
what to convert the incoming ZONE to. Use FUNC to move to the next field.
Press the FUNC button to move to the next field (ADD/DEL) and the revolving message
will change again. The new message will read:
Use ↑↓ to select ADD or DELETE mode. Once ADD or DEL is selected, the System
will ADD or DEL the CUSTOMER from the SYSTEM 3505 when SET is pressed (in
customer field). Use FUNC to move to next field.
If DEL is selected and SET is pressed, the printer will print the following message:
Press FUNC to move the next field (RESTORE). The revolving message will change to:
2-10
CHECK DIALER REPORT
30-MAR-95 08:30:24
FAIL 24HR,CUST ZZZZZZ
30-MAR-95 08:30:24
** MISSED DIALERS **
30-MAR-97 08-30-24
MISSED DD ZZZZZZ
MISSED DD ZZZZZZ
MISSED DD ZZZZZZ
MISSED DD ZZZZZZ
END DIALER REPORT
DEL CUSTOMER # XXXX
24HR TST=Y Conf. # X
Digitize, Inc.
Specifications Subject to Change Without Notice
) and REPORT. The following
700280-0001 Rev. B 5/11