Table of Contents
Advertisement
1 Getting Started
Connecting over LAN
40
The screenshots show the Keysight N7745A Multiport Power Meter. The same
N O T E
procedure applies when connecting to other N77xx instruments like attenuators
and laser sources.
1 Make sure the instrument is connected to the LAN, and that the LAN
LED on the front panel is green. See,
more information to connecting over LAN.
2 If it is not already running, start the Keysight Connection Expert
software.
3 Select "LAN (TCPIP0)" in the list.
Figure 26
4 Click on "Add an instrument" in the Task Guide.
5 Wait for the scan to finish.
6 Select the instrument in the list.
" LAN Interface" on page 29
Keysight N77xx Series
for
Advertisement
Table of Contents
