Connecting to the Instrument
Connecting to the Instrument - Overview
Connecting over USB
Keysight N77xx Series
When you are first connecting the instrument, we recommend you use
the Keysight Connection Expert included with the Keysight I/O
libraries (available on the CD supplied with the instrument, or from
www.keysight.com).
The screenshots show the Keysight N7745A Multiport Power Meter. The same
N O T E
procedure applies when connecting an Keysight N7744A Multiport Power Meter,
an Keysight N7751/2A Optical Attenuator and Power Meter, or an Keysight
N7761/2/4/6/8A Optical Attenuator or an Keysight N7711/4A Tunable Laser
System Source.
1 If it is not already running, start the Keysight Connection Expert
software.
Figure 21
2 Attach the instrument to the USB. The first time you attach the
instrument, follow the instructions on the screen to select the driver
for this instrument.
Keysight Connection Expert software
Getting Started 1
37