Keysight Technologies N77 Series User Manual page 42

1 Getting Started
42
8 Select the instrument in the list to see the associated tasks (in the
Task Guide on the left) and information (on the right).
•
For the N774x Multiport power meters, click on the "Instrument Web
Interface" button to control the instrument directly.
Figure 29
If it is not already installed, you will need to install a Java run-time
engine to use this page.
Basic configuration and functionality are available from this web
page.
•
For the attenuators, and as an alternative for the power meters, you
can control the instrument from the Keysight N77xx Viewer.
– Connecting using the N77xx Viewer is described in .
– Making power measurements with the N77xx Viewer is described
in .
– Controlling attenuation with the N77xx Viewer is described in
"Controlling the Optical Attenuator" on page
More advanced functionality is available through programming with
SCPI commands (described in the Programming Guide available on the
CD supplied with the instrument or from www.keysight.com), or using
the 816x VXI Plug&Play driver, version 4.3 or higher. For the N774x
Multiport power meters you can also use the IVI-COM driver.
49.
Keysight N77xx Series