Table of Contents
Advertisement
Keysight N77xx Series
3 The list shows instruments that have been given a VISA address.
If your instrument is not in the list,
1 Use the Keysight Connection Expert to check your instrument
has a VISA address
2 Click on the "Scan Again" button.
Once communication has been established to the instrument, its
details are shown.
4 If you need to change the connection configuration for an instrument
on the LAN, click on the "Configure Interfaces" button.
You can only configure the LAN parameters before the instrument
is connected.
Figure 31
Interface Parameters
Getting Started 1
45
Advertisement
Table of Contents
