Display Contrast; Single/Dual Column Display - Avaya 9500 Series Manual

Display Controls

Display Contrast

Through the phone menus you can change the contrast used on the display.
Procedure
1. Press the
2. Use the cursor keys to select Options & Settings.
3. Use the cursor keys to select Display.
• Select the display that you want to adjust. For example, on a phone with button modules
attached, several displays may be listed.
4. Use the cursor keys to select Contrast.
5. Use the left/right cursor keys to adjust the contrast as required.
6. When completed, press Save or Done.
7. Press Back/Exit to exit the menus.
Related links
Display Controls on page 131

Single/Dual Column Display

The phone can be set to use either the full screen width (single-column mode) or just a half-width
(dual-column mode) for each programmable appearance and feature button. The number of
programmable buttons that can be configured is not affected by the selected display mode.
Your system administrator can select which option is used by default. However, you can then
select which one you prefer.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Phone Screen Settings.
4. Use the up and down cursor keys to highlight Display Mode.
5. Press the Change soft key to change the setting or use the left or right cursor keys.
• Dual Column – Each programmed button occupies one half of the screen line on which
it is displayed, either the right-hand or left-hand side. The adjacent physical button on
that side of the display is used to indicate the button's status and to control the button
feature.
January 2023
button.
Using 9500 Series Phones on Avaya IP Office
Comments on this document? infodev@avaya.com
PHONE key and then press Features.
132