4. Enter the required information.
Serial No.
Enter the device's serial No.. The serial No. is on the rear panel of the device (A fixed-length
number with 9 digits).
IP Address
Enter the device's IP address.
Gateway
Enter the device's gateway.
Subnet Mask
Enter the device's subnet mask.
Password
Enter the device password, ranging from 8 to 16 characters in length.
No.
Enter the device No., ranging from 1 to 5.
5. Click Save to enable the settings.
6. Set SIP information.
Click Configure Configure serial No., IP address, gateway, subnet mask, password and No. of
Click Delete
Click Clear
Click Refresh
4.3.3 Network
Local Network Configuration
Steps
1. Click Local Network Configuration to enter the configuring the local network parameters page.
Network Indoor Station Configuration Guide
the device.
Delete the SIP Number.
Clear all SIP numbers.
Refresh SIP Information.
60