3.5 Synchronize Time
Steps
1. Tap Settings →
2. Tap Date Format and Time Format to set the time format.
3. Optional: Tap Time to set time manually.
4. Tap Sync Tim.
1) Select the Time Zone.
2) Enable Enable NTP.
3) Set the synchronizing interval, enter the IP address/domain of NTP server and port No.
Note
The default unit of synchronizing interval is minute.
●
The time zone can be configured as well if the NTP is not enabled.
●
3.6 Sound Settings
Set the ringtone sound, the volume, and the auto answer.
Network Indoor Station Configuration Guide
→ Time and Date to enter the time synchronization page.
Figure 3-29 Time Synchronization
29