Set Linked Device Ip - HIKVISION DS-KH6320-TE1 Configuration Manual

3.3.2 Set Linked Device IP

Linked network parameters refers to the network parameters of devices (like door station,
doorphone, main station, center, etc.), to which the indoor station is linked. Linked devices for the
indoor station refers to door station, center, main station, and doorphone.
With the private SIP protocol, intercom can be realized only when all these devices are in the same
network segment with the indoor station.
With the standard SIP protocol, intercom can be realized when all these devices support the
standard SIP protocol.
Steps
Note
The doorphone does not support adding with the standard SIP protocol.
●
Here take main door station network settings as example.
●
1. Tap Settings →
Note
Default admin password is the activation password.
2. Tap Main Door Station to pop up the device information dialog.
Set the parameters of the linked door station. Tap
Network Indoor Station Configuration Guide
→ Configuration →
Figure 3-19 Device Information
to enter the device management page.
to set parameters of the door station.
17