4. Enable Enable Hik-Connect Service.
5. Edit LBS server and Verification Code.
Note
Verification code is used to add the device to mobile client.
●
You can tap
●
6. View the service status on the page.
7. Optional: Scan the QR code on the screen.
Note
Scan the left QR code on the screen to download Hik-Connect.
●
Scan the right QR code on the screen to add the device to the mobile client.
●
3.7.2 Unlink the Account
Remove the account from the mobile client.
Steps
1. Tap Settings →
2. Tap
to enter the system maintenance page.
Network Indoor Station Configuration Guide
Figure 3-33 Hik-Connect Service Settings Page
to enable or disable verification code reveal.
→ Configuration , and enter the admin (activation) password.
33