Modify Network Information - HIKVISION DS-KH6320-TE1 Configuration Manual

Note
To add online devices to the software, you are required to change the device IP address to the
same subnet with your computer first.
1) You can click Refresh Every 60s to refresh the information of the online devices.
2) Select the devices to be added from the list.
3) Click Add to Client to add the device to the client.
5. Input the required information.
Nickname
Edit a name for the device as you want.
Address
Input the device's IP address. The IP address of the device is obtained automatically in this
adding mode.
Port
Input the device port No. The default value is 8000.
User Name
Input the device user name. By default, the user name is admin.
Password
Input the device password.
6. Optional: You can check the checkbox Export to Group to create a group by the device name. All
the channels of the device will be imported to the corresponding group by default.
The client also provides a method to add the offline devices. Check the checkbox Add Offline
Device, input the required information and the device channel number and alarm input number,
and then click Add. When the offline device comes online, the software will connect it
automatically.
Note
Add Multiple Online Devices: If you want to add multiple online devices to the client software,
●
click and hold Ctrl key to select multiple devices, and click Add to Client to open the device
adding dialog box. In the pop-up message box, enter the user name and password for the
devices to be added.
Add All the Online Devices: If you want to add all the online devices to the client software,
●
click Add All and click OK in the pop-up message box. Then enter the user name and password
for the devices to be added.

4.1.2 Modify Network Information

Select the device from the device list, click
of the selected device.
Network Indoor Station Configuration Guide
, and then you can modify the network information
43