Advertisement
Quick Links
Advertisement
Related Manuals for HIKVISION DS-KH6320-WTE1-W
Summary of Contents for HIKVISION DS-KH6320-WTE1-W
- Page 1 Network Indoor Station Installation Guide...
- Page 2 Network Indoor Station Installation Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or Danger could result in death or serious injury. Indicates a potentially hazardous situation which, if not Caution avoided, could result in equipment damage, data loss,...
-
Page 3: Table Of Contents
Network Indoor Station Installation Guide Contents 1 About this Manual ..................1 2 Appearance ....................2 3 Wiring Description ..................4 4 Installation ....................5 4.1 Wall Mounting Plate ..................5 4.2 Wall Mounting with Junction Box ..............5 4.3 Mounting Indoor Station without Junction Box ..........6... -
Page 4: About This Manual
Network Indoor Station Installation Guide 1 About this Manual Get the manual and related software from or the official website (http:// www.hikvision.com). Product Model DS-KH6320-WTE1,DS-KH6320-TE1 Network Indoor Station Scan the QR code to get the Scan the QR code to get the operation configuration guide for detailed guide for detailed information. -
Page 5: Appearance
Network Indoor Station Installation Guide 2 Appearance Front Panel Figure 2-1 Front Panel Table 2-1 Description Description Screen Microphone... - Page 6 Network Indoor Station Installation Guide Rear Panel Figure 2-2 Rear Panel Table 2-2 Description Description Network Interface Loudspeaker TF Card Slot Alarm Terminal Reserved Power Terminal...
-
Page 7: Wiring Description
Network Indoor Station Installation Guide 3 Wiring Description There are 20 pins in the terminal on the rear panel of the indoor station: 2 RS-485 pins, 5 reserved pins, 4 relay output pins, 8 alarm input pins, and 1 GND pin. Note There are 20 pins in the terminal on the rear panel of the DS-KH6320-TE1: 11 reserved pins, 8 alarm input pins, and 1 GND pin. -
Page 8: Installation
Network Indoor Station Installation Guide 4 Installation It supports wall mounting. There are two installation modes. 4.1 Wall Mounting Plate The wall mounting plate and the junction box are required to install the indoor station onto the wall. The dimension of junction box should be 75 mm (width) × 75 mm (length) × 50 mm (depth). -
Page 9: Mounting Indoor Station Without Junction Box
Network Indoor Station Installation Guide Before You Start Note Make sure the device in the package is in good condition and all the assembly • parts are included. The power supply the indoor station supports is 12 VDC. Please make sure your •... - Page 10 Network Indoor Station Installation Guide Before You Start Note Make sure the device in the package is in good condition and all the assembly • parts are included. The power supply the indoor station supports is 12 VDC. Please make sure your •...
- Page 11 UD12914B...
Need help?
Do you have a question about the DS-KH6320-WTE1-W and is the answer not in the manual?
Questions and answers