Modify Unlock/Duress Code - HIKVISION DS-KH6320-TE1 Configuration Manual

3. When you slide to disable Scene Password, there is no needs to enter password during scene
mode switching.

3.4.4 Modify Unlock/Duress Code

You can create and edit the duress code and unlock password of the indoor station.
Steps
1. Tap Settings →
2. Tap Password.
3. Tap Unlock Password or Duress Code to pop up the password settings dialog box.
Unlock Password
Create the indoor station's unlock password. If the device has connected to a lock, enter the
password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the duress code. An alarm
will be triggered to notify the management center secretly.
Note
The duress code and the unlock password cannot be the same.
4. Create a new password and confirm it.
5. Tap OK to save the settings.
Network Indoor Station Configuration Guide
→ Configuration , and enter admin (activation) password.
Figure 3-28 Unlock and Duress Code Settings Page
28