Output Settings - HIKVISION DS-KH6320-TE1 Configuration Manual

Wizard
Tap Wizard and set the language, network, indoor station type, device No., and select a device
according to the wizard. Refers to Quick Operation (For Normal Device) for the details.
Preference
Tap Settings → to enter the preference page.
Shortcut Settings
Enable call elevator, alarm, call management center, or leave message and the icon will be
displayed on the home page.
Zone Settings
Note
Only when enable Alarm in the shortcut settings, can the Zone Settings displayed on the
Preference page.
Set the zone parameters. For details, see Zone Settings .
Scene Settings
Note
Only when enable Alarm in the shortcut settings, can the Scene Settings displayed on the
Preference page.
Set the scene parameters, including the stay mode, the away mode, the sleeping mode, or
customize the scene. For details, see Arming Mode Settings .

3.9 Output Settings

You can set and control the connected output devices via the output settings page. You can change
the relay' name, and open duration. You can also set to display the relay button on the main page
or not.
Steps
1. Tap Settings →
Note
Supports up to 2 relays.
●
If no relays displayed on the page, the device may not support the function.
●
2. Select a relay and set the parameters.
Name
You can change the relay's name.
Network Indoor Station Configuration Guide
→ Output Settings .
39