3. Arm the selected zone.
Note
Zones are configurable on the arming mode page.
●
24H alarm zone including smoke detector zone and gas detector zone will be triggered even if
●
they are disabled.
Arming mode settings should be configured with the settings of arming status on the user
●
page of the device.
3.4 Password Settings
3.4.1 Change Admin Password
If you forget admin (activation) password when entering Configuration page, you can change it via
verification code from Email.
Before You Start
The Email address has been registered after activation. Refers to Security Settings .
Network Indoor Station Configuration Guide
Figure 3-25 Arming Mode Settings
25