Epson LS-B Series Manual page 45

Special Environmental Conditions
The surface of the Manipulator has general oil resistance. However, if
your requirements specify that the Manipulator must withstand certain
kinds of oil, please contact the supplier of your region.
Rapid change in temperature and humidity can cause condensation inside the
Manipulator.
If your requirements specify that the Manipulator handles food, please
contact the supplier of your region to check whether the Manipulator will
damage the food or not.
The Manipulator cannot be used in corrosive environments where acid or
alkaline is used. In a salty environment where the rust is likely to gather,
the Manipulator is susceptible to rust.
■ Use an earth leakage breaker on the AC power cable of the Controller to avoid
electric shock and circuit breakdown caused by short circuit.
Prepare the earth leakage breaker that pertains the Controller you are using.
WARNING
For details, refer to the Controller manual.
■ When cleaning the Manipulator, do not rub it strongly with alcohol or benzene.
It may lose luster on the coated face.
CAUTION
LS-B series Rev.5
LS3-B LS6-B Manipulator 3. Environments and Installation
27