Table of Contents
Advertisement
3.5
Care and maintenance
3.5.1
Care tips
Deactivate flush plate for cleaning
3.5.2
Cleaning cartridge valve
Visign for Public equipment set
Normal soap or a mild cleaning agent can be used for regular care and
prevention of lime scale on the flush plate. Under no circumstances
should scouring agent or scratching objects be used.
Strong stains can be removed using typical household cleaner. Rinse
the detergent thoroughly with clear water after the prescribed exposure
time. There should be no residue on the components.
To clean the flush plate, the flush actuation function can be briefly deac‐
tivated.
Deactivation only becomes possible 30 minutes after con‐
necting the power supply.
▶
Cover the top part of the infrared ring.
▷
The LED blinks twice after 10 seconds.
The LED blinks again after a further 2 seconds.
▶
Remove the cover from the infrared ring within 2 seconds.
▷
The LED blinks twice.
The flush actuation is deactivated for 10 minutes. The LED is lit
during this time.
▶
Clean flush plate.
▷
The LED goes out after 10 minutes and a flush is actuated.
The flush actuation is active again.
The cartridge valve may be cleaned, if necessary. Proceed as follows:
▶
Unscrew the cover plate from the basic panel.
Handling
24
Advertisement
Table of Contents
