Table of Contents
Advertisement
battery compartment
2.4.5
Setting options
Settings for the infrared sensor
Flush settings
Visign for Public equipment set
The battery compartment model 8351.11 (article number 731 786) can
also be connected as an alternative to the power pack.
Range of the infrared sensor
The following settings are possible:
Close range, so that the flush cannot be inadvertently actuated.
n
Medium range from approx. 450 mm. This setting is the factory set‐
n
ting.
Far range, so that the automatic actuation of a flush also works at a
n
greater distance from the urinal.
Manual flush in close range
If this option is activated, a flush can be actuated in the first 8 seconds
of entering the detection area by placing a hand in front of the sensor.
Lid in front of sensor
This setting is for the case that an open lid covers the sensor. The func‐
tion is deactivated in the factory settings. If the function is activated, a
flush cycle is actuated as soon as the lid is removed from the sensor
zone.
However, during planning, we still recommend that the lid is not placed
in front of the sensor in order to ensure the device works perfectly.
Flush duration
This setting is intended exclusively for the flush duration for the directly
actuated flushes. The flush duration for hygiene flushes is set sepa‐
rately.
The flush duration can be set in 5 steps to reach the required flush
volume.
Hygiene flush
The setting determines if a hygiene flush is actuated after 24 hours
without use.
Flush duration hygiene flush
Product information
10
Advertisement
Table of Contents
