Table of Contents
Advertisement
2.4.3
Operating mode
Infrared actuation
Visign for Public equipment set
Flush actuation takes place without contact via the infrared sensor on
the flush plate.
The flush volume can be set in five stages.
In order to actuate a flush, a person must be within the detection area of
the infrared sensor for at least 8 seconds.
If a person leaves the detection area, a flush is automatically actuated.
Depending on the setting, the flush duration is between 1 and 20 sec‐
onds.
A flush cycle can also be manually actuated by placing a hand in front
of the sensor during the first 8 seconds.
Product information
8
Advertisement
Table of Contents
