Setting The Time; Setting The Language - 3M Clean-Trace NGi Luminometer User Manual

6.06 Setting the Time

While in the DATE & TIME menu, use the navigation (
buttons to select SET TIME, press Select and 'Hours' is
highlighted on the display. Use the navigation (
change the 'Hour' until correct. Press the OK Button.
The 'Minutes' will now be highlighted on the display. Set the
'Minute' using the navigation (
The 'Seconds' will now be highlighted on the display. Set the
'Second' using the navigation (
Use the navigation ( /
▲
DATE & TIME menu or press Back to return to the SETUP menu.

6.07 Setting the Language

Contact your local distributor for a current list of languages available.
While in the SETUP Menu, use the navigation (
select LANGUAGE and press the Select button.
The LANGUAGE menu can now be seen.
Use the navigation ( /
▲
required. Press either of the OK buttons to return to the SETUP
menu.
Note: The language changes automatically as navigation (
buttons select a different language.
/ ) buttons then press OK.
▲ ▼
/ ) buttons then press OK.
▲ ▼
) buttons to select another item in the
▼
) buttons to select the Language
▼
/ )
▲ ▼
/ ) buttons to
▲ ▼
/ ) buttons to
▲ ▼
/ )
▲ ▼