Configuration Settings - DCS Bartok DAC User Manual

Configuration settings

Locking settings
When settings are locked, you cannot change the following:
• Sync mode for all inputs
• Output level
• Dual AES
• Channel swap
• Balance
• DSD filter
• USB1 audio class
• RS-232 mode
When the settings are locked, you cannot save or restore configurations, or perform a factory
reset.
1. Press the Menu button.
2. Select CONFIG > SETTINGS LOCK.
3. Press the Menu button to lock
Saving a system configuration
You can save the current system configuration to the unit's memory.
1. Press the Menu button.
2. Select CONFIG > SAVE CONFIG.
3. Press the Menu button to confirm the save.
Restoring a system configuration
If you change the settings accidentally, you can restore the configuration that was saved
previously.
1. Press the Menu button.
2. Select CONFIG > RESTORE CONFIG.
3. Press the Menu button to confirm the restore.
Resetting input names
You can reset any changes that you made to input names.
1. Press the Menu button.
2. Select CONFIG > RESET INPUT NAMES.
3. Press the Menu button to confirm the reset.
Resetting to factory conditions
You can reset the settings to factory conditions.
1. Press the Menu button.
2. Select CONFIG > FACTORY RESET.
3. Press the Menu button to confirm the factory reset.
or unlock the settings.
39