Setting Up; Connecting The Power Supply; Switching The Unit On And Off - DCS Bartok DAC User Manual

Setting up

Connecting the power supply

Use the supplied power cable to connect your Bartók DAC to the power supply.
1. At the rear of the unit, insert the power cable into the power socket.
2. Connect the plug to a power supply.

Switching the unit on and off

At the rear of the unit, there is a power rocker switch next to the power cable. There is also a
Power button on the front panel.
To switch on the unit:
1. On the rear of the unit, press the power rocker switch to the I position.
2. Press the Power button.
To switch off the unit:
• Press and hold the Power button until SWITCHING OFF is displayed.
Using sleep mode
Sleep suspends the unit in its current state, but keeps it ready for quick use.
• To enter sleep mode, press the Power button.
The display turns off, the front panel is disabled, and all outputs are muted. The Power
light turns on.
• To wake up from sleep mode, press the Power button.
To prevent screen burn-in of the display, switch the unit off or put it in sleep mode when
not in use.
15