DCS Bartok DAC User Manual page 23

Analogue outputs
1. Connect the Word clock output 1 on the Rossini Master Clock to the WORD CLOCK
IN 1 socket on the unit.
2. Connect the Word clock output 2 on the Rossini Master Clock to the WORD CLOCK
IN 2 socket on the unit.
3. Connect the Word clock output 3 on the Rossini Master Clock to the Word Clock input
on the Transport.
4. Press the Input button on the unit to select the input connected to the Transport.
5. Set the sync mode on the unit to
The Transport locks to the Rossini Master Clock.
► For more information, see "Setting the clocking sync mode" on page 36.
WORD CLOCK 1-2 AUTO.
23