Table of Contents
Advertisement
Software menus
Menu
INFO
AUDIO
SETTINGS
UNIT SETTINGS
CONFIG
DISPLAY
GENERATOR
To move up a level in the menus, select RETURN
Sub menu
UNIT STATUS
VERSION
CONTACT
UPDATE
PHASE
FILTER
DSD FILTER
CH SWAP
BALANCE
SYNC MODE
MAPPER
OUTPUT LEVEL
AES1/2 DUAL
USB CLASS
BUFFER MODE
UPSAMPLING
RS232 MODE
SETTINGS LOCK
SAVE CONFIG
RESTORE CONFIG
RESET INPUT NAMES
FACTORY RESET
BRIGHTNESS
DISPLAY ON/OFF
LOGO ON/OFF
CHANNEL CHECK
PHASE CHECK
BURN IN
Description
View information about the unit.
View the current software versions.
View dCS contact details.
Update the software.
Change the output phase for analogue inputs.
Change the PCM filter.
Change the DSD filter.
Swap the channels.
Adjust the balance.
Set the clocking sync mode for the current
input.
Control the data presented to the Ring DAC™
core
Set a level for the line outputs.
Enable or disable Dual AES.
Change the USB audio class.
Buffer the data to reduce clicks when the input
rate changes.
Enable or disable DSD upsampling.
Change the RS-232 mode.
Lock or unlock settings.
Save the current configuration.
Load a saved configuration.
Reset the input names to default.
Restore standard factory settings.
Adjust the display brightness.
Set the display to automatically switch off after a
period of inactivity.
Turn the dCS logo light on and off.
Test the system for swapped channels.
Test the system for phase reversals.
Output modulated pink noise to burn-in the unit.
.
31
Advertisement
Table of Contents
