DCS Bartok DAC User Manual page 24

Using the unit in Master Mode with a Transport
To reduce jitter when using the unit with a Transport, use the unit in Master Mode and slave the
Transport to it.
Analogue outputs
1. Press the Input button on the unit to select the input you want to use.
2. Connect the WORD CLOCK OUT socket on the unit to the Word Clock input on the
Transport.
3. Set the sync mode on the unit to
►
The Transport locks to the 44.1 kHz word clock from the unit.
24
For more information, see "Setting the clocking sync mode" on page 36.
MASTER.