Table of Contents
Advertisement
Connecting a power amplifier
You can connect a power amplifier directly to the balanced or unbalanced outputs.
1. Turn the rotary control on the unit to set the volume to -40.0 dB.
2. Connect cables to the rear of the unit.
•
If you are using the balanced outputs, connect XLR cables to the BAL LEFT and
BAL RIGHT sockets.
•
If you are using the unbalanced outputs, connect RCA phono cables to the
UNBAL LEFT and UNBAL RIGHT sockets.
3. Connect the other end of the cables to the power amplifier.
4. Switch on the power amplifier.
5. Play music on the unit.
►
For more information, see "Using the Bartók DAC" on page 26.
6. While music is playing, slowly turn the rotary control on the unit to increase the volume
to the desired level.
If you need to set the volume on the unit higher than -10.0 dB or lower than -30 dB to
reach a comfortable listening level, you may need to adjust the line output level.
►
For more information, see "Changing the line output level" on page 37.
dCS Mosaic
dCS Mosaic is a bespoke collection of hardware and software modules that allow you to access
your digital music. With dCS Mosaic, you can stream content from the following:
•
Local streaming sources, such as a music server on your network or using
Apple AirPlay
•
Internet services, such as Spotify, TIDAL, Qobuz and Deezer
•
Internet Radio
•
Podcasts via Airable
The Mosaic Control app
Mosaic Control is an app for your iOS or Android mobile device. With the Mosaic Control app you
have access to a vast library of music through a simple, yet powerful interface. You can use the
app to:
•
Browse media from various streaming services
•
Manage settings and configuration options for your dCS products
17
Advertisement
Table of Contents
