Rear Panel - DCS Bartok DAC User Manual

Icon Description
Clocking sync mode
Settings are locked
Phase is inverted
Channels are swapped
Decoding MQA format data
Decoding MQA Studio format data
Display is set to automatically turn off
Incorrect clock detected (AES and SPDIF inputs only)

Rear panel

1 2
Item
1 Balanced outputs
2 Unbalanced outputs
3 AES digital inputs
4 SPDIF digital inputs
5 USB sockets
6 Word clock inputs and
output
3 4
6
Description
XLR connectors to connect to a preamplifier or power amplifier.
► For more information, see "Line outputs" on the next page.
RCA connectors to connect to a preamplifier or power amplifier.
► For more information, see "Line outputs" on the next page.
Connectors for digital audio equipment.
► For more information, see "Digital inputs" on the next page.
Connectors for digital audio equipment.
► For more information, see "Digital inputs" on the next page.
USB1 and USB2 sockets.
► For more information, see "USB sockets" on page 13.
Connectors to accept word clock from source equipment or a master
clock.
► For more information, see "Word clock inputs and output" on
page 13.
5
7
8 9
10
11