Error Message; Non Touch Panel Models - Brother HL-3160CDW Service Manual

3.2

Error Message

The error messages displayed on the LCD of the machine and their descriptions are shown in
the table below.
3.2.1

Non touch panel models

First line
Belt End
Soon
Calibrate
Cannot Detect Put the Toner
Error message
Second line
-
Calibration failed.
Insufficient Toner
for Calibration.
Calibration failed.
Press Go.
Calibration failed.
Turn the power off
and then back on
again.
Cartridge back in.
Description
Number of pages printed with
the belt unit will reach the upper
limit soon.
Dot counter or develop roller
counter of color toner has
reached the upper limit during
color density adjustment
performed from the control
panel.
Density patch measurement
ended unsuccessfully during
color density adjustment
performed from the control
panel.
An error occurred with the value
measured during density sensor
sensitivity calibration.
An error occurred with the value
measured during color density
adjustment performed from the
control panel.
Black toner cartridge is not
recognized by the cartridge
sensor.
Yellow toner cartridge is not
recognized by the cartridge
sensor.
Cyan toner cartridge is not
recognized by the cartridge
sensor.
Magenta toner cartridge is not
recognized by the cartridge
sensor.
2-21
Error Refer
codes to:
4300 2-58
9802 2-74
9803 2-75
9804 2-75
9801 2-74
2400 2-55
2401 2-55
2402 2-55
2403 2-55
Confidential