Error Message; Lcd Models - Brother HL-2290 Service Manual

3.2 Error Message

The error messages displayed on the LCD and LED of the machine and their description are
shown in the table below.

3.2.1 LCD models

Initial display
Cannot Detect Put the Drum Unit
Cartridge
Error
Cooling Down Wait for a while
Cover is Open Close the Front
Drum !
Drum End
Soon
Ignore Data
Jam 2-sided
Error message
Scroll
back in.
Put the Toner
Cartridge back in.
Put the Toner
Cartridge back in.
Cover.
Close the Fuser
Cover which can be
found behind the
Back Cover of the
machine.
Slide the Green tab
on Drum Unit.
-
-
Pull out the 2-sided
Tray at the back of
the machine and
remove the jammed
paper.
Description
New process sensor could not
detect the new drum unit
correctly.
Toner cartridge is not
recognized by the cartridge
sensor.
The new toner sensor of the
toner cartridge could not detect
a new cartridge properly.
New toner box sensor could not
detect the new toner box
correctly.
The side thermistor detected a
temperature higher than the
specified value.
The front cover sensor detected
that the front cover was open.
The eject sensor detected that
the fuser cover was open.
Electric discharge that may be
caused by dirt on the corona
wire of the drum unit was
detected.
Number of the drum unit
rotations reaches the upper limit
soon.
Detected undecodable data
during printing.
Received undecodable PS data.
After the first side is printed in 2-
sided printing mode, the
registration front sensor does
not detect paper pass after a set
period of time.
2-21
Error Refer
codes to:
4F05 2-39
2400 2-37
4F01 2-39
5E00 2-39
6801 2-43
6001 2-40
6004 2-40
6A00 2-44
4000 2-38
--- 4.11.1
7800 2-46
Confidential