Brother HL-3160CDW Service Manual page 266

■
Adjustment of inter-color position alignment including registration sensor
calibration (auto)
< Operating Procedure >
(1) For models with touch panel
Press the [6] twice in the initial state of the maintenance mode. "REGISTRATION" is
displayed on the LCD.
For models without touch panel
Press the [▲] or [▼] in the initial state of maintenance mode to display
"MAINTENANCE 66" on the LCD, and press the [OK]. "REGISTRATION" is displayed
on the LCD.
(2) Press the [▲] or [▼] to display "ADD REGISTRATION" on the LCD.
(3) Press the [SET] or [OK]. "PLS WAIT 66-1" is displayed on the LCD and sensitivity
adjustment of registration sensor and adjustment of inter-color position alignment are
performed automatically.
(4) When this operation is completed without an error, "COMPLETED" is displayed on the
LCD.
(5) Press the [X] or [Cancel], and the machine returns to the initial state of maintenance
mode.
Note:
If the Adjustment of inter-color position alignment including registration sensor calibration
(auto) fails while being in process, "ERROR 66-1" is displayed on the LCD. Press the [▼] to
display the details of the error. Refer to the error message list on
troubleshooting.
5-34
5-32 for the
Confidential