Brother HL-3160CDW Service Manual page 61

Error message
First line
Print Unable Turn the power off
10 and then back on
again.
Print Unable Turn the power off
1D and then back on
again.
Print Unable Turn the power off
1E and then back on
again.
Print Unable Turn the power off
2E and then back on
again.
Print Unable Turn the power off
38 and then back on
again.
Print Unable Turn the power off
3A and then back on
again.
Print Unable Turn the power off
DB and then back on
again.
Print Unable Turn the power off
E0 and then back on
again.
Print Unable Turn the power off
E1 and then back on
again.
Print Unable Turn the power off
E5 and then back on
again.
Second line
The registration mark sensor R
is dirty and cannot normally
receive reflected light.
The registration mark sensor L
is dirty and cannot normally
receive reflected light.
A communication error occurred
in the LED ASSY (black).
A communication error occurred
in the LED ASSY (yellow).
A communication error occurred
in the LED ASSY (magenta).
A communication error occurred
in the LED ASSY (cyan).
Main PCB and LED control PCB
cannot access each other.
Cannot read/write in the main
PCB and LED control PCB.
Could not communicate with the
cartridge sensor on the machine
side.
Cartridge sensor on the
machine side does not work.
Cartridge sensor version on the
machine side is not available.
A temperature error occurred in
the external temperature/
humidity sensor.
A communication error occurred
between the controller and
engine in main PCB.
A communication error occurred
between the main ASIC and the
recording ASIC.
An error occurred at the ROM
check sum in the firmware.
Program error
An error occurred during access
to the DRAM in the main PCB.
2-42
Description
Error Refer
codes to:
1003 2-53
1004 2-53
1D01 2-54
1D02 2-54
1D03 2-54
1D04 2-54
1E01 2-54
1E02 2-54
2E00 2-56
2E02 2-56
2E04 2-56
3801 2-56
3A00 2-57
DB00 2-81
E000 2-81
E100 2-81
E500 2-81
Confidential