APPENDIX 2 DELETING USER SETTING
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
HL-L3210CW/HL-L3230CDN/HL-L3230CDW (For models without touch panel)
(1) Press the [▲] or [▼] to select the "Initial Setup" option, and then press the [OK].
(2) Press the [▲] or [▼] to select the "Reset" option, and then press the [OK].
(3) Press the [▲] or [▼] to select the "Machine Reset" option, and then press the [OK].
(4) Press the [▲] to select the "Reset".
(5) Press the [▲] to restart the machine.
HL-L3270CDW (For models with touch panel)
(1) Press the
(2) You will be asked to reboot the machine. Press the option in the table to reboot the
machine or to exit the process.
Press Yes for 2 seconds
No
Note:
If you do not reboot your machine, the reset process will not finish and your
settings will remain unchanged.
(3) Press the
INFORMATION
[Settings] > [All Settings] > [Initial Setup] > [Reset] > [Machine Reset].
Option
Reboot the machine. The machine will begin the reset.
The machine will exit without rebooting.
.
Description
App.2-1
Confidential