Brother HL-3160CDW Service Manual page 226

(5) Open the temporary folder and double-click the
"SvSettingTool.exe".
The screen shown on the right appears.
(6) Check that the USB port connected with the
machine is displayed in the box (A).
(7) Enter the model name in the box (B) and press
the [Find a model]. Series name and model
name are displayed in the box (C).
(8) Click the [Input information] shown as (E).
The Input Information screen shown on the
right appears.
(9) Click the [Serial No.] in the box (F).
Set Serial No. screen appears.
(10) Enter the serial number (15 digits) of the
machine in the box (G), and click the [Set]
shown as (H). "Set[***************]" and entered value appear on the [Serial No.] line in the
box (F). ("***************" indicates the serial number entered.)
(11) Click the [OK] shown as (J).
The Execute Setting screen shown on the right
appears and the serial number is written to the
machine.
(12) Click the [OK] shown as (L) and close the
Execute Setting screen.
(13) Click the [Cancel] shown as (K) and close the
Input Information screen.
(14) Click the [Get information] shown as (D).
The Get Information screen shown on the right
appears.
Memo:
You can check the serial number you entered
even if function code 80 is executed.
Refer to "1.3.25 Display machine log
information (Function code
(A)
(B)
(C)
(G)
(H)
80)".
4-5
(F)
(J) (K)
(L)
(M)
(D)
(E)
Confidential